Tecasint 5051 N
Especially developed for better sliding and wear resistance at high emperature applications.
Series of Tecasint 1000: have very high modulus, high rigidity and hardness.
It contains 15% praphite and 10% PTFE.
Product properties
- (Tecasint) mechanical properties, thermal properties, electrical properties, other properties, downloads, specifications or shapes & sizes please click on the tabs below. Colour: This product appears in: Polyimide. Request More Info Get a Quote Call Us Email Us.
- Torlon®has superior resistance to elevated temperatures. It is capable of performing under severe stress conditions at continuous temperatures to 500°F (260°C). Torlon®has extremely low coefficient of linear thermal expansion. Physical Properties Units Test 4203 4301 5030 5530.
5051 grey-grey – 5000 series with 30% glass fibre 8001 yellow-brown – 8000 series with 80% PTFE 20% polyimide 8061 yellow-brown – 8000 series with 60% PTFE 40% polyimide. TECASINT 1011 natural (unfilled) stock sizes. Varying stock sizes for each grade. Here are the stocked sizes that are available for 1011 natural as an example.
Exceptional gliding and wear-proof properties, Raised temperature applications
| Properties | Unit | Method | Value |
|---|---|---|---|
| Colour | |||
| Density | g/cm3 | DIN EN ISO 1183 | 1.48 |
| Flammability (UL94) | - | DIN IEC 60695-11-10 | V0 |
| Water absorption in air, 24 h / 96 h, (23ºC) | % | DIN EN ISO 62 | |
| Dielectric constant | - | IEC 60250 | |
| Volume resistivity | Ω*cm | IEC60093 | |
| Surface resistivity | Ω | IEC60093 | |
| Dielectric strength | kV/mm | IEC 60243 | |
| Dielectric dissipation factor (50 Hz) | - | IEC60 250 | |
| Comparative tracking index (CTI) | - | IEC 60112 | |
| Thermal conductivity | W/ (K.m) | ISO 22007-4:2008 | |
| Chemical resistance at 23ºC: deluted acids | - | ||
| Chemical resistance at 23ºC: strong acids | - | ||
| Chemical resistance at 23ºC: aliphatic hydrocarbons | - | ||
| Chemical resistance at 23ºC: chlorin dissolvents | - | ||
| Chemical resistance at 23ºC: alcohols | |||
| Chemical resistance at 23ºC: deluted bases | - | ||
| Chemical resistance at 23ºC: strong bases | - | ||
| Chemical resistance at 23ºC: aromatic hydrocarbons | - | ||
| Melting temperature | ºC | ISO 11357-3 | |
| Glass transition temperature | ºC | DIN 53765 | 330 |
| Specific heat | J/(g.K) | ISO 22007-4:2008 | |
| Coefficient of linear thermal expansion (CLTE): 23 - 60ºC | m/(m.K)x10-5 | DIN EN ISO11359-1;2 | |
| Coefficient of linear thermal expansion (CLTE): 23 - 100ºC | m/(m.K)x10-5 | DIN EN ISO11359-1;2 | |
| Max. allowable service temperature in air, short term | ºC | ||
| Max. allowable service temperature in air, long term | ºC | ||
| Min. allowable service temperature in air, long term | ºC | ||
| Heat deflection temperature | ºC | DIN EN ISO 75, A | |
| Yield stress | MPa | DIN EN ISO 527-2 | |
| Modulus of elasticity (tensile test) | MPa | DIN EN ISO 527-2 | |
| Elongation at break | % | DIN EN ISO 527-2 | 2.9 |
| Flexural strength | MPa | DIN EN ISO 178 | 120 |
| Impact strength, Charpy | kJ/m2 | DIN EN ISO 179-1eU | 25.8 |
| Tensile strength | MPa | DIN EN ISO 527-2 | 77 |
| Compressive strength | MPa | EN ISO 6041% / 2% | |
| Notched impact strength, charpy | kJ/m2 | DIN EN ISO 179-1eA | 3.9 |
| Ball indentation hardness | MPa | ISO 2039-1 | |
| Shore D hardness | - | DIN EN ISO 868 |
- A – applicable
- B – partially applicable
- C – not applicable
Rods
Diameter (mm)
Filter by colors
There are no products for the given parameters, please choose another size / color.Plates
Thickness (mm)
Size of plate (mm x mm)
Filter by colors
Tecasint 5051
There are no products for the given parameters, please choose another size / color.